 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Phone:
(631) 473-0382 Fax: |
|
| We Sell Quality Products at Very Competitive Prices. |
|
||
 |
||
| TMP MARINE PRODUCTS is representing the "JetSLIDE" PWC Docking Platform from CanDock. With the heavier 4-stroke , 3-seater and 4-seater PWC's becoming the norm, CanDock has introduced a wonderful piece of engineering - the "JetSLIDE". There is nothing on the market today so well suited for the 3 and 4 seater PWC's. After extensive testing, in very cold Canadian weather, and the attendant patent applications, the CanDock PWC "JetSLIDE" is available for your residential, commercial, or private facility. The accompanying photos show the PWC lift, it's components, and the basic design. |
||
|
Photo # 1 SINGLE "JetSLIDE" PWC LIFT
|
||
 |
||
| Tinged with CanDock's successful modular dock cubes, a central 'slide" accepts the PWC as it's driven aboard. Unlike other designs, the high capacity flotation cubes provide a more stable platform, and when mated to the low slung slide, make entry easy. The basic 4 x 6 cube unit supports over 3,000 lbs. (double or more than our competitors) and gives you almost 18" of extra width over the 'tip-toe-around' width of others. Especially with children involved, you want stability at all times. The 8.5 ft. 'slide' protrudes down and back to lift the approaching watercraft clear of the water, and then, with a varying side slope, cradles the hull high above wave action no matter what the amount of V in the PWC's design. The 'slide' drains all water away, leaving a clean and safe platform. There are no open holes on or between multiple PWC docks waiting for an accident. Especially in saltwater installations, a barnacle encrusted opening is something we would all like to avoid. Built entirely of gray HD-Polyethylene, the platform doesn't burn your feet and will last for decades, in the hot sun. There is nothing to corrode, no metal clamps or bolt-on adapters to rip the plastic skin apart, in rough water situations. |
||
|
|
||
|
Photo # 1-A Single "JetSLIDE" (4 x 5 CUBES)
|
||
 |
||
|
|
||
 |
||
|
|
||
|
PHOTO # 1-B SINGLE "JetSLIDE" SIDE VIEW (4 X 5 CUBES)
|
||
 |
||
|
|
||
|
PHOTO # 1-C SINGLE "JetSLIDE" FRONT VIEW WITH
(OPTIONAL) ADDITIONAL FRONT UNITS (4 X 7 CUBES) |
||
 |
||
|
|
||
|
Photo # 2 Double "JetSLIDE" attached to pilings
|
||
 |
||
| The "JetSLIDE" can be anchored using common 1-1/4" galvanized pipe jetted, or augured into the bottom, or attached to a floating structure. This simple installation works in tidal areas as well as reservoirs with varying water levels. As part of CanDock's modular system, the unit could be added to an existing CanDock system. The CanDock platform is larger than almost everyone else in the business. The basic single "JetSLIDE" is about 6-1/2 ft. Wide and 10-1/2 ft. Long. However, the size is up to the customer; and adding extra cubes will give you extra buoyancy and more walkaround room. The multi-slide models can employ a single row of cubes between adjacent slides, matching the available real estate of almost all of our competitors, or you can add a row of cubes between, or in front of the 'slides', to increase your accessibility. |
||
|
|
||
|
Photo # 3 Double "JetSLIDE"
|
||
 |
||
| The CanDock "JetSLIDE" can be shipped economically via motor-freight. Assembly and installation is easy and the units go together like building blocks, without any cutting or drilling.
"JetSLIDE's" are in stock and available for immediate delivery. The 4 x 6 Single PWC configuration includes: 1 CanDock "JetSLIDE" 12 Gray Cubes 19" x 19" x 16" High 10 Pins w/ Captive Nuts and Washer 9 Perimeter Bolts and Nuts 1 Bow Cleat w/ Nut (as shown in Photo # 1, but without the two rear-most cubes) |
||
|
|
||
|
Photo # 4 Triple "JetSLIDE"
|
||
 |
||
| The basic Double PWC System configuration includes: 2 CanDock "JetSLIDE" 19 Gray Cubes 19" x 19" x 16" High 20 Pins w/ Captive Nuts and Washers 10 Perimeter Bolts and Nuts 2 Bow Cleat w/ Nut (similiar to the Triple Unit in Photo # 4, but without the rear-most cubes) This provides a 11 ft. Wide x 10.5 ft. Long platform The Delux Double PWC System (shown in Photo # 4) adds: 25 Gray Cubes 19" x 19" x 16" High 24 Pins and Nuts |
||
|
|
||
|
Photo # 5 Double "JetSLIDE"
|
||
 |
||
|
|
||
|
PHOTO # 6 "JETSLIDE" USED AS A BOAT LIFT
|
||
 |
||
|
|
||
|
PHOTO # 7 "JETSLIDE" USED AS A JET BOAT LIFT
|
||
 |
||
|
|
||
|
Thank You for considering the CanDock "JetSLIDE" for your personal needs.
|
||
|
Call / Fax or E-mail us for Pricing and additional information.
|
||
