|
|
|
|
TMP MARINE PRODUCTS can provide you with one of the finest Rotationally Molded Dock Boxes and Trash Receptacle on the market today. The dock boxes are rotationally molded of white polyethylene resin and can withstand the harsh marine environment.
The Mission: To manufacture and service the finest rotationally molded products on the market today
Design Advantages
With proper design, rotational molding offers advantages over other molding processes. Parts can be molded as one piece, eliminating seams, and assembled parts. The process also offers consistent wall thickness and stronger outside corners that are virtually stress free.
|
|
|
|
|
 |
|
|
8000
|
8006
|
8011
|
|
Trionic extra heavy-duty dock boxes are rotationally molded of white polyethylene resin
Key Benefits
|
- Extra heavy duty construction
- Lockable reinforced cover
- Easy to assemble nylon hinges with stainless steel hardware
- Cover restrained with stainless steel cables
- Long term ultraviolet inhibitors protect against sun rays
- Available in white and white granite
|
|
Part #
|
Dimensions
|
|
8000
|
Triangular Dock Box - 48.25" long x 28" wide x 30" high
|
|
8006
|
Rectangular Dock Box - 48.25" long x 26.5" wide x 29" high
|
|
8011
|
Triangular Dock Box - 59.25" long x 34.5" wide x 28.5" high
|
|
|
|
| |
|
|
|
30 Gal. Trash Receptacle
|
- Extra heavy duty construction
- Rotationally molded of 1/4" thick impact-resistant polyethylene
- Long term ultraviolet inhibitors protect against sun rays
- Glass filled nylon hinges with marine stainless steel hardware
|
|
|
TRA-1
Overall dimensions - 21 1/4" x 21 1/4" x 31 height
|
Rotational Molding Process
|
| The rotational molding process starts with a fabricated (aluminum or steel) or cast aluminum mold. Pre-measured plastic resin (usually ground polyethylene which is similar in appearance to ground sugar), is loaded into each mold. Then the molds are moved into the oven where they are slowly rotated on both a vertical and horizontal axis. The melting resin adheres to the hot mold and coats every surface evenly. Once the parts are cooled using air and water, they are released from the mold. |
| |
|
Call or E-mail for additional information, pricing, or to place an order
|
|
|
|
