 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Phone:
(631) 473-0382 Fax: |
|
| We Sell Quality Products at Very Competitive Prices. |
|
|||||||||||||||||
 |
|||||||||
| If you need Absorbent Products, then ENVIRO-BONDTM has the Bilge Sock, Booms, Pillow and Spill Response Kits for you. TMP Marine Products is the manufacturer’s representative for ENVIRO-BONDTM Bilge Sock, Booms, Pillows, Particulate and Spill Kits. The ENVIRO-BONDTM products are NEW to the market, but they are widely accepted and are being used as part of the “CLEAN MARINA” and “CLEAN BOATER” programs in many states. |
|||||||||
 |
|||||||||
 |
|||||||||
| Enviro-BondTM Bilge Socks, Booms, Pillows, loose Particulate and Spill Kits for oil, gasoline and diesel, are used to reduce environmental pollution. The Enviro-Bond is a quality product designed to absorb spilled or leaked liquid hydrocarbons, that accumulate in the bilge of a boat. Once the hydrocarbon comes in contact with the polymer inside the boom, it will be converted from liquid to a solid. The hydrocarbons will not drip from the bonding polymer, and therefore they can be discarded in the trash can and are safe for landfills. The Enviro-Bond polymers will commence bonding immediately and reduces the off gases by 80% in 5 minutes, effectively reducing the fumes in the bilge compartment. The 3" x 20" Bilge Sock will absorb and bond 2.5 quarts of oil, gasoline, and diesel. | |||||||||
| We know, based on multiple independent studies, that ENVIRO-BOND™ polymers are the highest quality products of their kind available in the world today. We strictly adhere to the principle that quality is never an accident. ENVIRO-BOND™ products reflect years of research and skillful development designed to exceed present day standards. Other spill products do not possess the innovative technology of ENVIRO-BOND™ and are truly not well designed, developed or researched, simply well marketed. When evaluating ENVIRO-BOND™ on a price basis, it is important to remember that any other product on the market that even comes close to offering the overall benefits and effectiveness of ENVIRO-BOND™ will require at least four (4) or more times the amount of material to effectively encapsulate and solidify the same quantity of spilled hydrocarbon. Since you will need to use much less ENVIRO-BOND™, you will need to buy, handle and store much less sorbent product than with other products. As the amount of waste generated is significantly reduced, you will also haul, handle and dispose of much less waste mass than before. These factors combined with quick, effective and complete spill control/cleanup and tremendous labor reductions make ENVIRO-BOND™ an extremely cost effective cleanup product. In addition to those benefits already discussed, ENVIRO-BOND™ polymers possess the unique ability to suppress the vapors of the encapsulated hydrocarbons. Furthermore, most products on the market will leach the product that they have absorbed back into the earth, ENVIRO-BOND™ will never release the encapsulated hydrocarbons. It is also important to emphasize that ENVIRO-BOND™ 403 is hydrocarbon specific, i.e. it will only absorb and molecularly bond with the spilled hydrocarbon while repelling any water. Any uncontaminated polymer can be recaptured and reused, adding further to the cost benefits of the product. We hope you will consider ENVIRO-BOND™ polymers for your remediation needs. |
|||||||||
|
|||||||||
|
|
|||||||||
|
|
|||||||||
Definition: 1. From the Greek – POLY means "Many" MER means "Parts" 2. A compound of high molecular weight derived either by the addition of many smaller molecules, as polyethylene, or by the combination of many smaller molecules with the elimination of water, alcohol, or the like, as nylon. 3. A compound formed from two or more polymeric compounds. Polymers are substances that may consist of large macromolecules, are made up of repeating units. The molecular sub-units that are used to synthesize polymers are called monomers, and reactions by which monomers are joined together are called polymerization. A polymer is the bonding together of molecular structures of various molecular weights, or substances having the same molecular weight, to achieve the molecular weight and structure for a useful function and purpose. The society that we know today would not exist without polymers. Products such as Saran Wrap TM, Tupperware TM, and plastics used on telephones, computers, etc. are polymers. The ENVIRO-BONDTM polymer structures formulated and tested are of the highest quality. Extensive testing was done on the formulation under E.P.A. guideline 40 CFR 300, subpart J of the national spill contingency plan, identified as 400 series. |
|||||||||
|
|||||||||
| ENVIRO-BONDTM 403 HYDROPHOBIC: • Remains buoyant after encapsulation for simplified waste recovery. • Reduces clean-up time and cost. • Captures only liquid hydrocarbons. Lets water pass, adding to the selectivity; won’t absorb water. • Works on hard surfaces, sand or water – fresh or salt.
LIGHTWEIGHT: • Floats. • Is easy to handle, to disperse and recover.
CLEAN, NO-TOXIC, NON-CORROSIVE: • No exotic protection needed (only goggles and dust-mask suggested). • Safer working conditions; reduced liability. • Lowers exposure risk.
REDUCES 80% FLAMMABILITY: • Safer working conditions.
HIGHER ABSORBENCY (BONDING): • Less material need to buy, haul, handle and store. • Need less / cost less. Since less is needed, less waste is generated. • Cost effective. • Clean up and disposal costs minimized.
REDUCES TOXICITY: • Remediates. • Safer working conditions; reduced liability.
NON-LEACHING: • Able to be landfilled.
ENCAPSULATES AND SOLIDIFIES: • Can’t be pressed or squeezed out. • Will not drip when handled. • Reduces exposure to hazardous materials, thus safer. • Minimizes liability. • Able to be landfilled • Less waste generated • Cleanup and disposal costs minimized. • Reduces overall costs. • Floats, is easy to handle, to disperse and recover. • Safer working conditions; reduced liability.
INCINERABLE: • Reduces, if not ends, liability. • Less than 1% ash. • Retains and enhances BTU’s.
FAST ACTING:
• Reduces and contains contamination. Reduces liability.
NOTICE: • Due to a wide range of liquids that ENVIRO-BONDTM 403 can absorb, TMP Marine Products cannot recommend specific disposal methods. Used ENVIRO-BONDTM products must be dispose of in accordance with local, state and federal regulations.
• Please refer to the Material Safety Data Sheet on this product for additional information. |
|||||||||
|
