|
 |
| |
| TMP Marine Products sells the Cheyenne Manufacturing Life Ring Cabinet that is available as just the Cabinet, or with the Optional stand. This fiberglass cabinet is made to store and protect your life rings, which are required aroung open water areas. Be sure you have the Life Rings, at your facility and that they are in good operating condition.
|
|
|
|
Here is a product you never want to have to use, but a must have in any area which has potential for a drowning incident. Our life ring cabinets protect life rings from damaging UV rays and adverse weather. Keeps life rings in good condition in the event of any emergency. Our cabinets really "dress up" a facility. |
|
| |
CABINET DIMENSIONS: 33" HIGH x 33" WIDE x 5 - 1/2" DEEP
OPTIONAL STAND: DIMENSIONS: 15-1/5" HIGH x 33-1/2" WIDE x 6-1/2" DEEP
|
|
|
| |
- Lockable "Break Glass" or Non-Locking "T-Handle"
- Mounting hardware - Wall, Deck or Rail
- Standard Color - Safety Yellow (other colors available)
|
| |
|
|
| |
|
|
| |
- Protects Life Ring from ultraviolet rays, chemicals and harsh winter environments
- Keeps the Life Ring in good working condition in the event of an emergency (Always ready to go)
- OSHA requires Life Ring around open water, and to also keep them in good working condition
- Really dress up your facility
|
|
|
| |
- 30" Coast Guard Approved Life Ring with 90 feet of Rope with Float
- Windlatch to keep door closed in wind
- Alarm
- Gasket around the door
- Fiberglass Stand
|
|
|
|
|
TMP MARINE PRODUCTS has several Life Rings and Life Ring Holders, from TAYLOR MADE PRODUCTS. The Life Rings have United States Coast Guard Approval and some also meet Canadian Coast Guard approval.
|
|
|
All Rings Meet USCG Approval
|
|
|
| |
| Inspected and tested in accordance with U. S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines are secured inside the foam core and contain UV stabilizers to ensure sunlight resistance. Molded-in becket design means there are no straps to wear, mildew, or deteriorate. Choose between energy absorbent vinyl skin or tough, hardshell polyethylene skin. SOLAS approved models equipped with reflective tape.
|
|
VINYL COATED FOAM
|
| White w/White Rope |
Orange w/White Rope |
Buoy Diameter |
| 360 |
363 |
20” |
| 361 |
364 |
24” |
|
566† |
30” |
|
POLYETHYLENE SKIN
|
| White w/White Rope |
Orange w/Black Rope |
Buoy Diameter |
| 567 |
569 |
24” |
| 568 |
570 |
30” |
|
571†† |
30” |
|
* Vinyl Skin on Solas Model only, with black rope.
† SOLAS approved ring suitable for quick release from the bridge.
†† SOLAS APPROVED
|
|
|
| |
 |
Meets Canadian Coast Guard approval. Tough outer polyethylene shell is resistant to gasoline, oil, saltwater, and pool chemicals. Closed-cell foam core for buoyancy. Unique grab line threading system allows for replacement. |
|
| |
|
AER-O-BUOY
|
| White w/White Rope |
Orange w/White Rope |
Buoy Diameter |
| 570002 |
570001 |
24” |
|
570003 tt |
30” |
|
570004 t |
30” |
|
*Reflective tape on 30" diameter ring buoys only.
† SOLAS approved ring suitable for quick release from the bridge.
†† SOLAS approved.
|
|
|
| |
| Along with Ring Buoys, Taylor Made Products introduces a line up of USCG Approved Horseshoe Buoys. All models incorporate a closed cell foam core, tough vinyl fabric covering (flame retardant) with heavy duty zipper, that will not rot or mildew and stainless steel hardware. Deluxe Model includes sewn-in sea anchor to slow buoy in water |
 |
|
| |
|
HORSESHOE BUOY
|
| MODEL # |
DESCRIPTION |
COLOR |
SIZE |
| 557 |
Horseshoe Buoy |
Yellow |
22 X 3 |
| 558 |
Horseshoe Buoy |
Yellow |
24 X 4 |
| 559 |
Delux H.B. |
Yellow |
24 x 3 |
|
| |
|
|
| |
|
STAINLESS STEEL LIFE RING HOLDER
|
| |
 |
These stainless steel holders will mount on any 7/8" or 1" railing or stanchion. Elastic cord holds your buoy secure.
Stock No. #2013
|
|
| |
|
|
| |
Stainless steel "J" hooks designed to hold ring buoys up on any wall, fence, wheelhouse, etc.
Stock No. #2016
|
 |
|
| |
|
|
| |
 |
This stamped aluminum holder is powder coated to withstand the harsh marine environment. It mounts to any 7/8" or 1" railing. Complete with a nylon strap to hold your buoy secure.
Stock No. #2015
|
|
| |
|
|
| |
 |
Designed to securely hold 3" and 4" thick buoys and adjusts for 20" and 24" diameters. Buoy holder made from heavy wall steel and powder coated silver for years of trouble free service. Stainless steel fasteners included.
Stock No. #2020
|
|
| |
|
|
| |
 |
Rugged polyethylene case houses one 24" ring. Ring station permanently locates life ring and protects ring from constant weather exposure. Bright yellow color for high visibility. Clear vinyl cover quickly detaches to access life ring.
Stock No. Description
#570006 Life ring station
#570007 Life ring station with replacement vinyl cover
#570008 Life ring station with #570001 ring & 50' rope
#570009 Life ring station with #570002 ring & 50' rope
#570005 3/8" yellow poly rope x 50' |
|
| |
|
|
| |
| Reflective tape meets SOLAS approval. High quality marine grade adhesive for maximum service. Twelve 4" pre-cut pieces in each kit. |
| |
|
|
| |
|
Stock No. #581 For Taylor Ring Buoy
12 - 4" pre-cut pieces
|
|
|
| |
|
Call, Fax or E-mail us for Additional Information and Pricing
|
