|
|
| 'LIFT YOUR BOTTOM OUT OF THE WATER' |
| |
| TMP MARINE PRODUCTS offers a wide range of lifts for Boats and PWC's. Several types are available for you to select from. There are manual, electric and optional Remote Control Models. Review the lifts below and call with your specifications for a price quotation: |
CRADLE LIFTS - CHAIN DRIVE SYSTEM
|
|
| Now you can enjoy the convenience of a drive-on boat storage system, and the peace of mind of knowing your boat is safe and secure. Each lift is built, then hot dipped galvanized for corrosion protection. This procedure creates a metallurgic bond between the zinc and the steel. The lifts are also available in Marine Grade 6061-T6 aluminum, or a combination - Galvanized steel uppers and Aluminum lowers. |
| Chain drive cradle lifts are available for quiet, smooth, safe, and dependable vertical lifting and lowering of your boat. This drive system is renown for its reliability and strength as evidenced by other boat lift manufacturers using the same basic design. |
| The vertical cradle lifts are available in 9 load capacities, ranging from 4,500 lbs - 2 motors - 4 piling units, up to 30,000 lbs. 4 motors - 8 piling systems. |
|
|
- 23 years ago we started providing you with quality boat lifts systems. 5 years later we introduced the first CRADLE LIFT System to the marine market. After 15 years and thousands sold, it is safe to say a lot has changed since we started. Boats have changed. You have changed. One thing remains the same. We still put the same attention and care into today's CRADLE LIFT Systems as we did our first.
- 9 Models - We offer 9 capacities (4500, 7000, 9000, 11000, 13000, 16000, 20000, 25000, 30000) in three models - Galvanized steel, Aluminum, or Combination (Galvanized steel uppers and Aluminum lowers).
- The Heart - Our CRADLE LIFT Systems are powered by a chain and sprocket winch. This winch features a totally enclosed, weather resistant motor and self-contained gear box, so our winches will run quietly and smoothly, even years after purchase.
- Pipe Drive - The pipe drives are made of schedule 80 galvanized pipe with aluminum grooved cable winders. Each pipe drive has five self aligning pillar block bearings with a grease fitting for easy maintenance.
- Long Life - Our Marine Elevator systems are manufactured from galvanized steel, aluminum, or a combination of both. for long life. We use only the finest components, stainless steel cable and rust resistant alloy fillings.
- Chocks - Are adjustable to fit most hull types.
- Radio Motor Control (RMC) - The most convenient way to operate your boat lift is with Davit Master RMC. Simply press the buttons on your hand held remote to operate your lift. Distance may vary depending your location.
|
|
|
|
|
|
CRADLE LIFTS - BELT DRIVE (B-LINE)
|
|
| The Belt Drive series of cradle lifts are manufactured with the same attention to quality, convenience and safety as the Chain Drive series of lift cradles. The only difference between the two is the drive system and a price reduction on the Belt Drive series. |
| The Belt Drive vertical lifts are available in 6 load capacities, ranging from 4,500 lbs. - 2 motors - 4 piling units, up to 16,000 lbs. - 2 motors - 4 piling systems. |
|
B-LINE CRADLES
|
|
|
|
|
|
| This is a Low profile drive-on boat storage system for boats weighing up to 14,000 lbs. and available in 4,000 lb., 8,000 lb., 12,000 lb., and 14,000 lb. capacities. |
| This elevator system can be mounted to a concrete foundation, pilings and over rocky rip rap. |
| The Marine Elevators are manufactured from steel, then hot dipped galvanized. They are powered by a chain and sprocket winch, that runs quietly and smoothly, even after years of use. The Elevators are available in the following slope angles: 0 degree - 15 degree - 30 degree and 45 degree. Chocks are available to fit most hull types. |
|
|
Four Models - Available in 4,000 lb., 8,000 lb., 12,000 lb., and 14,000 lb. capacities
|
- Versatile - Our Marine Elevator systems can be mounted to a concrete foundation, piling and over rocky rip rap. A Marine Elevator system is also ideal where pilings cannot be installed or in areas where there are extreme tides. In this case, a Marine Elevator is perfect because it can extend out into deeper water.
- The Heart - Our Marine Elevators are powered by a chain and sprocket winch. This winch features a totally enclosed, weather resistant motor and self-contained gear box, so our winches will run quietly and smoothly, even years after purchase.
- Long Life - Our Marine Elevator systems are manufactured from steel, then hot dipped galvanized for long life. We use only the finest components, stainless steel cable and rust resistant alloy fillings.
- Chocks - Are adjustable to fit most hull types.
- Marine Elevator Slopes - 4,000 lb. & 8000 lb. systems: 0º, 15º, 30º, and 45º slopes (unless pile mounted, then omit 0º for the 8,000 lb. system)
- RMC- Radio Motor Control Unit - Davit Master's RMC is the most convenient way to operate your Davit Master Marine Elevator system. Simply press the buttons on your hand-held remote to operate your lift system while up to 100 feet away! The RMC unit is compatible with most Davit Master motor driven systems and can be fitted to new or existing lifts.
|
|
|
|
| Call or E-mail for current prices |
|
|
|
|
|
|
|
