Jack Plates, Tilt-N-Trim, Powr Steering and Outboard Brackets by
|
|
|
| |
All TMP Marine Products line of PowrTran units are manufactured in the USA
|
| |
|
|
| |
| TMP Marine Products line of Powr Jack Plates, Powr Tilt, Powr Trim-N-Tilt, Powr Steer, and Outboard Motor Brackets by Pow'rTran are built better, for better boat performance right here in the U.S.A.
|
|
TMP Marine Products line of Powr Tran products will unlock the
hidden performance in your boat and motor !
|
| |
|
TMP Marine Products - PowrTran units feature advanced engineering and an exclusive marine sealed electro-mechanical linear actuator. No messy hydraulics.
|
| |
|
TMP Marine Products wants you to Compare the POWR TRAN warranty with
any competitor's warranty, and you will see why this is the best !
|
| |
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
TMP Marine Products
“Power Jack Plate”
by PowrTran
JP75PSS Powr Jack Plate
Rated for a maximum 250 hp motor with a maximum motor weight of 650-lbs, this unit will help you squeeze additional acceleration, speed and fuel economy out of your rig.
|
|
|
Specifications:
Max Horsepower: 250 hp
Max Motor Weight 650 lbs.
Unit Weight: 55 lbs.
Dimensions: 19 ¾”W x 18 ¾”H x 6”D
Vertical Lift: 7.5”
Setback: 6”
Operation: 12 Volt Electro-Mechanical
Actuator Drive: Ball Screw
Construction: 6061-T6 Marine Alloy Extruded Aluminum Frame
Mounting Plate: 1/2" thick
Hardware: Stainless Steel
|
The JP75PSS features an advanced sleek design with an extra heavy duty 6061-T6 extruded marine alloy aluminum frame that ranges in thickness from ½” to ¾” throughout. A full 7.5" vertical lift provides exact prop height for any condition. With the JP75PSS you no longer need to settle for a compromised transom height, or sacrifice top end speed to get on plane.
|
The JP75PSS is powered by a PowrTran Electro-Mechanical Linear Actuator rather than a hydraulic actuator that delivers a full 3,500 lbs. of thrust with less than a 25 amp draw on a 12 volt battery. And, the JP75PSS "stays put" where you position it. It will not "back down" like hydraulic powered units.
|
Our actuators are built and marine sealed to operate for years in a harsh, wet environment. See our Frequently Asked questions to learn more about the advantages of an Electro- Mechanical Actuator vs. a Hydraulic Actuator. |
|
| |
|
|
| |
TMP Marine Products
“Power Tilt”
by PowrTran
PT10SS
The PT10SS Powr Tilt is built to tilt outboard motors in a still, or static position. It cannot be used to trim motors, or operate in a trim position.
|
|
|
Specifications:
Max Horsepower: 25 / 200 lbs.Weight: 15 lbs.
Length: 14”
Degree of Tilt: 72º
Operation: 12 Volt Electro- Mechanical
Actuator Thrust: 1,000 lbs.
Construction: Almag Cast Aluminum
Hardware: Stainless Steel
"Not recommended for 4 - Stroke Outboard Motors"
|
| The Powr Tilt gives you power tilt with the push of a button from anywhere in the boat. It makes launching, loading and cruising shallow water easier. The 72 degree tilt lets you tilt the motor completely out of the water.
unit installs in less than ½ hour, without special tools and there is no need to remove your motor.
It features an exclusive PowrTran marine sealed, elector- mechanical linear actuator. No messy hydraulics.
This unit is ideal for pontoons, small boats, dinghies, inflatable's and kicker engines.
|
|
| |
|
|
| |
TMP Marine Products
“Power Tilt and Trim”
by PowrTran
PT60SS
The PTT60SS PowrTran - PT&T unit unlocks the hidden performance potential in boats and motors. Our power trim and tilt features advanced engineering with a combination of features. The PowrTran is like a transom bracket and power trim and tilt all combined into one superior unit. It not only enhances top end speed, but also reduces fuel consumption, improves hole shots, stabilizes boat ride and tracking, and eliminates most plowing, porpoising and chinewalking.
|
|
|
Specifications:
Max Horsepower: 130
Weight: 40 lbs.
Dimensions: 17½” W x 14 ½ “ H x 6 ¾” D
Degree of Tilt: 63º
Operation: 12 Volt Electro-Mechanical
Actuator Drive: Ball Screw
Construction: 6061-T6 Marine Alloy Extruded Aluminum Frame
Hardware: Stainless Steel
|
| The PowrTran - PT&T has full power all the way up, and will not kick down from propeller force at any degree of trim. The PowrTran PT&T is ideal for most boats, including pontoons. Best of all, PowrTran PT&T units are very economical. They cost less than most factory units and are easier, faster and less expensive to repair than factory hydraulic units. Simply put, the PowrTran - PT&T has no equal. Should service be necessary the actuator is removed in minutes by removing two clevis pins and unplugging the electrical cord. Just place the clevis pin in the hole in the lower port side of the PT&T frame and continue boating..
The PTT60SS is designed for bolt on motors.
|
|
| |
TMP Marine Products
“Power Tilt and Trim”
by PowrTran
The PTT60PSS PowrTran - PT&T unit unlocks the hidden performance potential in boats and motors. Our power trim and tilt features advanced engineering with a combination of features. The PowrTran is like a transom bracket and power trim and tilt all combined into one superior unit. It not only enhances top end speed, but also reduces fuel consumption, improves hole shots, stabilizes boat ride and tracking, and eliminates most plowing, porpoising and chinewalking. The PowrTran PT&T has full power all the way up, and will not kick down from propeller force at any degree of trim.
|
|
|
Specifications:
Max Horsepower: 50
Unit Weight: 38 lbs.
Dimensions: 14 ¾” W x 14 ½ “ H x 6 ¾” D
Degree of Tilt: 63º
Operation: 12 Volt Electro- Mechanical
Actuator Drive: Acme Screw
Construction: 6061-T6 Marine Alloy Extruded
Aluminum Frame
Hardware: Stainless Steel
|
| The PowrTran PT&T is ideal for most boats, including pontoons. Best of all, PowrTran PT&T units are very economical. They cost less than most factory units and are easier, faster and less expensive to repair than factory hydraulic units. Simply put, the PowrTran PT&T has no equal. |
Should service be necessary the actuator is removed in minutes by removing two clevis pins and unplugging the electrical cord. Just place the clevis pin in the hole in the lower port side of the PTT frame and continue boating.
|
The PTT60PSS is
designed for
clamp-on motors. |
|
| |
|
|
| |
TMP Marine Products
“Power Steering Unit”
by PowrTran
PS200SS
The PS200SS is used with transom or OB Bracket mounted motors without a steering tube. The Powr Steer is ideal for awkward or hard-to-reach transom or bracket-mounted motors up to 20 HP. The unit has a marine grade, submersible, high torque 12 volt motor that draws just 5 amps.
|
|
|
Specifications:
Outboard Motor: Without Steering Tube
Max Horsepower: 20 hp
Controls: 2 Button Switch with 16’ of wire.
Weight: 5 lbs.
Dimensions: 2 ½” X2 ½” X 24”
Operation: 12 Volt Electro-Mechanical
Hardware: Stainless Steel |
The unit steers the motor faster side-to-side to adjust course in rough or fast-moving water.
The drive unit and motor are
separate from each other for fast and easy service or replacement. |
Designed for closed throttle cruising and trolling, the PS200 can be operated with the 2 button switch.
An optional wireless remote control is also available, which allows the power steering to be operated from anywhere onboard. |
|
| |
TMP Marine Products
"Power Steering Unit”
by PowrTran
PS205SS
The PS205SS is used with transom, or OB Bracket mounted motors,
with steering tubes. The Powr Steer is ideal for awkward, or
hard-to-reach transom, or bracket-mounted motors up to 20 HP and
has a marine grade, submersible, high torque, 12 volt motor that draws
just 5 amps.
|
|
|
Requirements:
Motor can be mounted on port or,
starboard side.
Motor Side: Requires at least 8" from
the end of the steering tube.
Steering Arm Side: Requires at least 12"
Specifications:
Outboard Motor: With Steering Tube
Max Horsepower: 20 hp
Controls: 2 Button Switch with 16” of wire.
Weight: 5 lbs.
Dimensions: 2 ½” X2 ½” X 24”
Operation: 12 Volt Electro-Mechanical
Hardware: Stainless Steel
|
| The unit steers the motor faster side-to-side to adjust course in rough or fast-moving water.
The drive unit and motor are
separate from each other for fast and easy service or replacement.
|
Designed for closed throttle cruising and trolling, the PS205 can be operated by hand or foot. An optional wireless remote control is also available, which allows the power steering to be operated from anywhere on board.
The wireless remote control can be purchased with the unit (See the PS305SS) or can be purchased and added to your unit any time |
|
| |
TMP Marine Products
"Power Steering Unit”
by PowrTran
PS300SS
The PS300SS is used with transom or OB Bracket mounted motors without a steering tube. The Powr Steer is ideal for awkward or hard-to-reach transom or bracket-mounted motors up to 20 HP. The unit has a marine grade, submersible, high torque 12 volt motor that draws just 5 amps.
|
|
|
Specifications:
Outboard Motor: Without Steering Tube
Max Horsepower: 20 hp
Controls: 2 Button Switch with 16’ of wire.
Weight: 5 lbs.
Dimensions: 2 ½” X2 ½” X 24”
Operation: 12 Volt Electro-Mechanical
Hardware: Stainless Steel |
The unit steers the motor faster side-to-side to adjust course in rough or fast-moving water.
The drive unit and motor are separate from each other for fast and easy service or replacement. |
Designed for closed throttle cruising and trolling,
the PS300SS can be operated using the wireless
remote control.
This allows the power steering to be operated from anywhere on board or by hand, or foot with a 2 button switch from up to 16’ away. |
|
| |
TMP Marine Products
"Power Steering Unit”
by PowrTran
PS305SS
The PS305SS is used with transom, or OB Bracket mounted motors, with steering tubes. The Powr Steer is ideal for awkward, or hard-to-reach transom, or bracket-mounted motors up to 20 HP and has a marine grade, submersible, high torque, 12 volt motor that draws just 5 amps.
|
|
|
Requirements:
Motor can be mounted on port or,
starboard side.
Motor Side: Requires at least 8" from
the end of the steering tube.
Steering Arm Side: Requires at least 12"
Specifications:
Outboard Motor: With Steering Tube
Max Horsepower: 20 hp
Controls: 2 Button Switch with 16” of wire.
Weight: 5 lbs.
Dimensions: 2 ½” X2 ½” X 24”
Operation: 12 Volt Electro-Mechanical
Hardware: Stainless Steel
|
| The unit steers the motor faster side-to-side to adjust course in rough or fast-moving water.
The drive unit and motor are separate from each other for fast and easy service or replacement.
|
Designed for closed throttle cruising and trolling, the PS305 can be operated using the wireless remote control which allows the power steering to be operated from anywhere on board either by hand or foot with a 2 button switch, from up to 16’ away.
|
|
| |
|
|
| |
|
TMP Marine Products
"Wireless Remote Control”
by PowrTran
This Wireless Remote Control is for the boater who doesn't want to be tied down to switches. The handheld wireless remote control will control your power steering unit with the touch of a button.
|
|
|
The Wireless Remote Control allows the power steering to be operated from anywhere on board, by hand, or foot with a 2 button switch from up to 16’ away.
|
|
| |
HAND CRANK OUTBOARD MOTOR BRACKET
|
| |
TMP Marine Products
"Hand Crank Outboard Motor Bracket”
by PowrTran
PB120
PowrTran Hand Crank OB Bracket
|
|
|
Specifications:
Frame: 9 1/2" X 10" X 24"
Motor Mounting Board:
9 1/2" X 10 1/2" X 1 1/2"
Weight: 14 lbs.
Operation: Hand crank/screw drive
Vertical Lift: 14"
Max hp rating: 20 hp or 115 lbs |
Hand crank your outboard up and down. The PB120 easily operated with the supplied crank handle, a 3/8" ratchet, power drill or wrench. Just minimal turning pressure lifts a 115 lb. outboard. The positive locking screw drive stays where you position it - just like your car jack.
Not recommended for use with four stroke engines |
FEATURES:
* Heavy duty extruded aluminum frame.
* Stainless steel hardware.
|
|
| |
STATIONARY OUTBOARD MOTOR BRACKET
|
|
| |
TMP Marine Products
"Stationary Outboard Motor Bracket”
by PowrTran
PB130
PowrTran Stationary OB Bracket
|
|
|
The PB 130 features a heavy duty marine alloy aluminum frame with 90 degree angle top and bottom edges for added strength and on HDPE motor mounting board. Includes mounting hardware.
9 1/2" X 10 1/2" X 1 1/2"
Weight: 6 lbs.
|
|
| |
SWIM PLATFORM OUTBOARD MOTOR BRACKET
|
|
| |
TMP Marine Products
"Swim Platform Outboard Motor Bracket”
by PowrTran
PB140
PowrTran Swim Platform OB Bracket
|
|
|
The PB140 Swim Platform OB Bracket features a heavy duty marine alloy aluminum frame and HDPE motor mounting board.
Includes mounting hardware.
Mounting plate dimensions:
9 1/2" X 10 1/2" X 1 1/2"
Weight 6 lbs
For: 10 HP / up to 110 lbs.
|
|
| |
For Additional Information and Pricing contact us at P (631) 473 - 0382 F (631) 473 - 2445
|
| |
ADVANTAGES of ELECTRO-MECHANICAL LINEAR ACTUATORS
|
|
| |
| Question: |
|
What is the advantage of an Electro-Mechanical Operation Versus a Hydraulic Operation? |
| |
|
|
| Answer: |
|
Electro-Mechanical Operation versus Hydraulic Operation |
|
|
|
|
1. |
Environment - Hydraulics fluid pollute. Fluid leaks into the water and evaporates into the air. |
|
|
|
|
2. |
Dependability - |
|
|
|
|
|
a. Electro-mechanical actuators have “zero creep”. They stay where you position them. They will not back down. |
|
|
b. Hydraulic cylinders get “soft” and will back down” requiring frequent resetting of your trip position. |
|
|
|
|
3. |
Precise Positioning- |
|
|
|
|
|
a. Electro-mechanical actuators are precise. One revolution of the motor turns the drive x revolutions – every time
b. Hydraulic actuators change based upon the amount of fluid in the system. |
|
|
|
|
4. |
Lower Cost and Lower Incidence of Repair- |
|
|
a. Electro-mechanical actuators require little maintenance, are easier and less costly to repair than hydraulic systems. |
|
|
|
|
5. |
Longer Life - |
|
|
|
|
|
a. Because they are mechanical, you can accurately predict the life of electro-mechanical actuators.
b. You can’t predict the life of a hydraulic cylinder. |
|
| |
 INSTALLATION INSTRUCTIONS
|
|
| |
|
|
Pow'r / Crank OB Brackets Installation - in PDF format for Models PB100 & PB120
|
|
|
PowrTran Trim n' Tilt Installation Guide |
PT10SS Pow'rTilt Installation Instructions
View/Download
|
PT10SS Pow'rTilt Installation Instructions |
JP50P Installation
View/Download
|
JP50P Installation instructions |
JP100 Installation Instructions
View/Download
|
JP100 P Installation instructions |
JP105 Installation Instructions
View/Download
|
JP105 P Installation instructions |
JP75 Installation Instructions
View/Download
|
JP75 Installation instructions |
Control Switch Connection Installation Instructions
View/Download
|
Control Switch Connection Instructions For Electrical Control Box Assembly |
| Wireless Remote Installation Instructions
View/Download
|
Hand Held Wireless Remote Installation Instructions |
PS 200/300
Installation Instructions
View/Download
|
PS200SS and PS300SS Installation Instructions
|
PS 205/ PS30SS
Installation Instructions
View/Download
|
PS205SS and PS305SS Installation Instructions |
|
| |
|
|
| |
| WARRANTY
|
Warranty information is included with each product and is limited to the policy set forth. A returned goods authorization is required for all returns. This RGA number must be marked on the outside of the returned carton, or the return will not be accepted.
Trim and Tilts, and Jack Plate carry a two-year warranty from the date of purchase against failure in material, or workmanship and are designed to provide years of satisfactory use when properly installed and used in accordance of its design intent.
Powr Steers carry a one-year warranty from the date of purchase against failure in material, or workmanship and are designed to provide years of satisfactory use when properly installed and used in accordance of its design intent.
In the unlikely event of a failure, contact Janal Distribution for inspection and determination of warranty status. A Returned Goods Authorization (RGA) number will be assigned and must be obtained prior to return of any merchandise, defective, or otherwise. Items must be returned Pre-Paid.
RETURN GOODS POLICY:
No returns accepted without prior consent and a Return Merchandise Authorization number. Items must be shipped prepaid to Janal Distribution, Inc.. Returns made for reasons other than defective merchandise will be charged a 15% handling fee.
|
|
| |
|
|
|
|
|
|
|
| |
For Additional Information and Pricing contact us at P (631) 473 - 0382 F (631) 473 - 2445
|
