| |
|
|
|
|
Roll-n-Go Shore Ramp Docking Systems are the affordable way to own high quality, easy-to-assemble and use, aluminum shore docking system. You can use the Roll-n-Go Shore Ramps for all Personal Watercraft (PWC), most boats to 2000 pounds, and Pontoon Boats.
Roll-n-Go Shore Ramp Docking Systems are the perfect alternative to traditional PWC lifts and boats lifts.
Review the literature below and see how Roll-n-Go Shore Ramp Docking System is changing the way small watercraft get in and out of the water. If you have questions regarding your installation, or need additional information, contact TMP MARINE PRODUCTS - your Dealer for the Roll-n-Go Shore Ramp Docking Systems.
|
|
|
|
|
| |
Glide easily in and out of the water, in just seconds, without scratching your craft's hull. Lightweight, portable and economical, the Roll-n-Go PWC Model makes getting in and out of the water part of the fun! At just 54 pounds, this is Roll-n-Go's most popular and most portable model. Adjustable rail spacing will allow the system to handle any PWC, including all 3-person models. It has an overall length of 11 feet, with extra and optional 8 ft. long sections available. The 15 foot winch strap includes a nylon loop, on the hook, to prevent scratching the PWC hardware and hull.
|
|
|
|
SPECIFICATIONS
|
| MAX. WEIGHT CAPACITY |
1,000 lbs. |
| WEIGHT |
54 lbs. |
| OVERALL LENGTH |
11' |
| OVERALL WIDTH |
30" |
| RAIL WIDTH |
Adjustable 11"-14" |
| ROLLER TYPE |
"Donut" shaped Polyolefin |
| NUMBER OF ROLLERS |
14 |
| ROLLER BEARING |
Straight Bore |
| TILTING ROLLER AXLE |
N/A |
| CONSTRUCTION |
Aluminum |
| HARDWARE |
Stainless Steel |
WINCH
"Dead lift" Rating
Gear Ratio
Strap Length
Hook Type |
Zinc Plated
900 lbs.
3:1
15 feet
Hook w/ Nylon PWC Loop |
| ANCHORING |
N/A |
| MIN. REQUIRED ANCHORING |
None Required unless using extension |
| WARRANTY |
5 Years** |
| OPTIONS |
| ADD-ON SECTIONS |
8' |
| NUMBER OF ROLLERS |
12 |
| WINCH UPGRADE AVAILABLE |
N/A |
**2-Year warranty for salt water applications
|
|
|
| |
|
|
| |
|
|
| Roll-n-Go's newest model, the 750 is the most affordable shore docking system. It combines durable, rust free components with all the standard features you've come to expect from the leader in shore docking. 18' overall length, 1,100lb. winch with a 20' strap and (12) non-marking, polyurethane “donut” rollers make this the ideal model for smaller fishing, sail and row boats. Two rail width settings and three winch height adjustments accommodate many types of watercraft. Available with 9' Extensions |
| |
|
|
|
|
|
|
|
The 750's tough 1,100-lb. winch.
|
|
|
|
|
SPECIFICATIONS
|
| MAX. WEIGHT CAPACITY |
750 lbs. |
| WEIGHT |
92 lbs. |
| OVERALL LENGTH |
17' 10" |
| OVERALL WIDTH |
Adjustable 21"-24" |
| RAIL WIDTH |
Adjustable 21"-24" |
| ROLLER TYPE |
"Donut" shaped Polyurethane |
| NUMBER OF ROLLERS |
12 |
| ROLLER BEARING |
Delrin™ spanner and bushing |
| TILTING ROLLER AXLE |
N/A |
| CONSTRUCTION |
Aluminum |
| HARDWARE |
Stainless Steel |
WINCH
"Dead lift" Rating
Gear Ratio
Strap Length
Hook Type |
Zinc Plated
1,100 lbs.
4:1
20 feet
Standard Boat Hook |
| ANCHORING |
Screw-in Ground Anchor with Hardware |
| MIN. REQUIRED ANCHORING |
Screw-in or Fasten to Wall or Footing |
| WARRANTY |
5 Years** |
| OPTIONS |
| ADD-ON SECTIONS |
8' 11" |
| NUMBER OF ROLLERS |
10 |
| CABLE UPGRADE |
50' *** |
| SUPPORT LEG KIT |
Yes |
| WIDE SUPPORT KIT |
Yes |
| FLOAT KIT |
Yes |
**2-Year warranty for salt water applications
***Available with upgraded winch only
|
|
|
|
| |
|
|
|
|
This versatile, adjustable Roll-n-Go model fits small watercraft up to 1200 pounds, from sailboats to Jon boats, small V-hull and Flat-hull boats. The length is 18 feet and the rails adjust from 24" to 40". Included are 16 urethane "donut" style rollers, which mount anywhere along the rails. Also available, as an option, are complete 9 foot add-on sections. The standard 1700 pound winch, with 25 foot strap, is upgradeable to a 1500 or 2500 pound braking winch with 25 or 50 foot cable. This easy-to-assemble kit comes complete with ground anchoring system.
|
|
|
|
|
|
|
|
Perfect for sailboats or small fishing boats.
|
|
|
|
|
SPECIFICATIONS
|
| MAX. WEIGHT CAPACITY |
1,200 lbs. |
| WEIGHT |
130 lbs. |
| OVERALL LENGTH |
17' 10" |
| OVERALL WIDTH |
Adjustable 24"-40" |
| RAIL WIDTH |
Adjustable 24"-40" |
| ROLLER TYPE |
"Donut" shaped Polyurethane |
| NUMBER OF ROLLERS |
16 |
| ROLLER BEARING |
Delrin™ spanner and bushing |
| TILTING ROLLER AXLE |
N/A |
| CONSTRUCTION |
Aluminum |
| HARDWARE |
Stainless Steel |
WINCH
"Dead lift" Rating
Gear Ratio
Strap Length
Hook Type |
Zinc Plated
1,700 lbs.
5:1
25 feet
Standard Boat Hook |
| ANCHORING |
Screw-in Ground Anchor with Hardware |
| MIN. REQUIRED ANCHORING |
Screw-in or Fasten to Wall or Footing |
| WARRANTY |
5 Years** |
| OPTIONS |
| ADD-ON SECTIONS |
8' 11" |
| NUMBER OF ROLLERS |
12 |
| WINCH UPGRADE AVAILABLE |
1,500 or 2,500-lb. self-braking w/ 25' cable |
| CABLE UPGRADE |
50' *** |
| SUPPORT LEG KIT |
Yes |
| WIDE SUPPORT KIT |
Yes |
| FLOAT KIT |
Yes |
|
|
|
|
|
|
|
| This Heavy-duty Roll-n-Go Model 2000 handles boats to 2000 pounds. Typically used for 16' to 18' fishing boats, jet boats, etc. This model features tilting axles, each with two extra-wide urethane rocking rollers that gently cradle any boat hull. Optional 8'11" extensions are available. The standard 1700 pound winch with 25 foot strap, is upgradeable to a 1500 or 2500 pound self-braking winch with 25 or 50 foot cable. This easy-to-assemble kit includes the ground anchor system. |
|
|
|
SPECIFICATIONS
|
| MAX. WEIGHT CAPACITY |
2,000 lbs. |
| WEIGHT |
162 lbs. |
| OVERALL LENGTH |
17' 10" |
| OVERALL WIDTH |
Adjustable 33"-49" |
| RAIL WIDTH |
Adjustable 24"-40" |
| ROLLER TYPE |
Ribbed 4" wide Polyurethane |
| NUMBER OF ROLLERS |
24 |
| ROLLER BEARING |
"Rocking" Delrin™ Sleeve |
| TILTING ROLLER AXLE |
Yes |
| CONSTRUCTION |
Aluminum |
| HARDWARE |
Stainless Steel |
WINCH
"Dead lift" Rating
Gear Ratio
Strap Length
Hook Type |
Zinc Plated
1,700 lbs.
5:1
25 feet
Standard Boat Hook |
| ANCHORING |
Screw-in Ground Anchor with Hardware |
| MIN. REQUIRED ANCHORING |
Screw-in or Fasten to Wall or Footing |
| WARRANTY |
5 Years** |
| OPTIONS |
| ADD-ON SECTIONS |
8' 11" |
| NUMBER OF ROLLERS |
16 |
| WINCH UPGRADE AVAILABLE |
1,500 or 2,500-lb. self-braking w/ 25' cable |
| CABLE UPGRADE |
50' *** |
| SUPPORT LEG KIT |
Yes |
| WIDE SUPPORT KIT |
Yes |
| FLOAT KIT |
Yes |
|
|
|
|
|
|
Optional extension for shallower shorelines.
|
|
|
|
|
|
|
|
|
| Getting your Pontoon Boat in and out of the water, until now, has usually been an expensive proposition. Roll-n-Go's Shore Ramp Docking System, for Pontoon Boats, handles Pontoon Boats up to 2000 pounds, with 18" to 26" (Round Only) pontoon diameters. Rails adjust from 66" to 82" on-center pontoon separation. Included in the kit are 52 polyurethane "donut" style rollers, which mount anywhere along the rails. Also available, as an option, are complete 9 foot add-on sections. The standard 1700 pound winch with 25 foot strap is upgradeable to a 1500 or 2500 pound self-braking winch with 25 or 50 foot cable. This easy-to-assemble kit includes ground anchoring system. |
| |
|
|
|
SPECIFICATIONS
|
| MAX. WEIGHT CAPACITY |
2,000 lbs. |
| WEIGHT |
250 lbs. |
| OVERALL LENGTH |
17' 10" |
| OVERALL WIDTH |
Adjustable* |
| RAIL WIDTH |
Adjustable* |
| ROLLER TYPE |
"Donut" shaped Polyurethane |
| NUMBER OF ROLLERS |
52 |
| ROLLER BEARING |
Delrin™ spanner and bushing |
| TILTING ROLLER AXLE |
N/A |
| CONSTRUCTION |
Aluminum |
| HARDWARE |
Stainless Steel |
WINCH
"Dead lift" Rating
Gear Ratio
Strap Length
Hook Type |
Zinc Plated
1,700 lbs.
5:1
25 feet
Standard Boat Hook |
| ANCHORING |
Screw-in Ground Anchor with Hardware |
| MIN. REQUIRED ANCHORING |
Screw-in or Fasten to Wall or Footing |
| WARRANTY |
5 Years** |
| OPTIONS |
| ADD-ON SECTIONS |
8' 11" |
| NUMBER OF ROLLERS |
28 |
| WINCH UPGRADE AVAILABLE |
1,500 or 2,500-lb. self-braking w/ 25' cable |
| CABLE UPGRADE |
50' *** |
| SUPPORT LEG KIT |
Yes |
| WIDE SUPPORT KIT |
Yes |
| FLOAT KIT |
N/A |
|
|
|
|
|
|
Model Pontoon with modified Extension Kit.
Note the addition of a center walkway to launch
and retrieve. No dock required!
|
|
|
|
Wide Beam Supports with Basic Leg Kits.
Pipes left longer for easy adjustment
during the season.
|
|
|
|
52 Polyurethane rollers.
|
|
|
|
|
Call or E-mail for current pricesnnnn
|
| |
|
|
|
|
|
